Our range of half and full height turnstiles is widely used in the unmanned areas where strict security is required. These completely tamper resistant turnstiles can be used as stand alone units or they can be part of an integrated system. Used specially in unguarded locations, these turnstiles can easily withstand all the weather conditions. Turnstiles could be operated mechanically for exit operations and access control systems. Available with combination of fail-lock or fail- safe these turnstiles can be controlled in one or both directions, which means they can be free or locked in opposite ways or can be controlled in both the ways. Our clients can avail from us a variety of turnstile in diverse finishes that include mixture of painted steel or stainless steel body with painted or stainless steel arms. Operated with self catering heavy duty motors these turnstiles are available with either three of four arms. The rotating column of the turnstiles turns without any vibrations. Designed with one or two ways these turnstiles specifically include:

Operation specification:

• The locking and unlocking of the turnstile is accomplished by use of a low voltage, 24V DC, System, activation is by a momentary, isolated normally open dry contact closure
• Electrical controls are available in both entrance and exit directions
• Controls may be fail-safe, fail-lock or any combination, in either controlled direction. If free passage is required, no electrical controls are provided
• All fail-lock applications include a mechanical key release which will allow free passage in case of an emergency
• Once a direction of passage is opened, it will remain open until the user proceeds through to the other side of the turnstile
• Once the user proceeds through the turnstile, the reset system automatically

Specifications:

• Throughput: 12 to 15 persons per minute with access control
• Rotor arm height from Ground: + 840 mm 120 deg. stop (Tri arm)
• Positive action lock is provided to prevent multiple people’s access or exit
• Anti-back up device to prevent reverse rotation after 25deg
• The cabinet is made of heavy gauge mild steel with epoxy powder coated finish or stainless steel to ensure long trouble free operating life and requiring minimal maintenance
• A Self-centered mechanism with hydraulic damping to ensure complete rotation of the tripod head to reset position
• Temp. Range: 5 deg. to + 55 deg. Centigrade
• Turnstile is certified by an authorized certification
• Ingress protection shall be of at least IP54/NEM3, is rugged and industrial type
• Direction of entry: Bi-directional / Unidirectional (Controlled and free rotation)
• This is compatible to any access-exit control/ attendance/pay roll system/ device
• It has side hand rail to prevent forced side entry of persons